標籤

esxi 5 上 update

原vmware vsphere host update utlity變成要與vsphere center結合才能使用

下為手動做patch更新資料

download patch (montly)

update patch
■
Update ESXi 4.0 and ESXi 4.1 hosts with the vihostupdate command, as discussed in the vSphere Command-Line Interface Installation and Reference Guide included in the vSphere 4.1 documentation set.
■
Update ESXi 5.0 hosts with esxcli software vib commands discussed in the vSphere Upgrade documentation included in the vSphere 5.0 documentation set. You cannot run the vihostupdate command against an ESXi 5.0 host.

comm

Welcome to the communities

The installation instructions for the HP offline bundle are shown on the HP site where you downloaded the bundle. Click the link for the offline bundle not the Download button and the instructions are on the installation tab.

Copied from the HP website

1. Power off any virtual machines that are running on the host and place the host into maintenance mode.
2. Transfer the offline bundle onto the ESXi host local path, or extract it onto an online depot.
3. Install the bundle on the ESXi host.
  • Install remotely from client, with offline bundle contents on a online depot:
        esxcli -s <server> -u root -p mypassword software vib install -d <depotURL/bundle-index.xml>
  • Install remotely from client, with offline bundle on ESXi host:
        esxcli -s <server> -u root -p mypassword software vib install -d <ESXi local path><bundle.zip>
  • Install from ESXi host, with offline bundle on ESXi host:
        esxcli software vib install -d <ESXi local path><bundle.zip>
4. After the bundle is installed, reboot the ESXi host for the updates to take effect.
5. (Optional) Verify that the vibs on the bundle are installed on your ESXi host.
esxcli -s <server> -u root -p mypassword software vib list
6. (Optional) Remove individual vibs.  <vib name> can be identified by listing the vibs as shown in #5.
esxcli -s <server> -u root -p mypassword software vib remove -n <vib name>
標籤：

留言

張貼留言

熱門文章